35.00 zł
Lowest price in the last 30 days: 35.00 zł.
CHARACTERISTICS
Surface waterproofing treatment for polymeric gypsum products.
The preparation does not cause shining or change the structure of the impregnated surface.
If you want to stock up on a polymer gypsum water repellent that is really effective, then check out this product. This innovative chemical will help you protect your products from water absorption.
The product forms an invisible protective barrier on the surface, preventing water and dirt from penetrating the structure.
PREPARATION
It is recommended to carry out an application test to assess the final effect of the impregnation.
Surface preparation
The basic requirement for impregnation is a properly prepared substrate surface. This surface should be evenly porous, clean, dry and especially not greasy. New gypsum products can be impregnated no sooner than 2-6 days after these works have been carried out. It is recommended that impregnation work is carried out in dry weather, at a temperature of +5 to +30°C and a relative humidity of the air up to 80%. The surface becomes fully water repellent after approx. 24 hours. During this time it should be protected from water and dirt. Carefully protect all surfaces that will not be impregnated (e.g. metal parts, wood, etc.) before working. If they become contaminated, wash off immediately with water.
Overlay
Before using impregnate please precisely stir it!
Impregnation can be carried out with a brush, by spraying, or by immersing small parts in the finished solution for about 5 minutes. Zbut recommended to carry out impregnation twice in quick succession using the "wet on wet" method. Apply the second coat depending on the ambient temperature no later than after 30 minutes, i.e. while the surface is still damp. The surface to be impregnated should be saturated thoroughly and evenly.
Do not leave the waterproofing layer unabsorbed. Remove excess product 2-10 minutes after impregnation.
Restrictions on use
Do not use for impregnation of: marble, granite, sandstone, coloured ceramics or dark-coloured gypsum, as it may leave a white, hardly removable residue. In addition, it is not recommended for use if it comes into contact with wax or extremely high temperatures.
Spreading rate: 10-15 m2 with 1L of the agent applied twice. The consumption of the product depends on the type and absorbency of the impregnated material and the application technique.
Storage
Store only in original packaging at a temperature of -5 to +30°C, out of the reach of children, away from food products, food dishes.
Attention! HandiCast polymer gypsum waterproofing (65 MPa) is a caustic alkaline solution. All work should be carried out using: goggles, gloves and protective clothing. In case of skin contact, the contaminated area should be rinsed abundantly with cold water, rubbed with diluted vinegar and rinsed again with water. When using the spraying method, wear a respiratory protection mask. Wash hands and face thoroughly after use.
HandiCast polymer gypsum waterproofing (65 MPa) must not be diluted in zinc, aluminium or brazed vessels.
Enter your e-mail address if you would like to receive information about news and promotions.
product easy to use, as described